Basic HTML Version
STEEL V-BLOCK
‘TOOLFAST’ Steel V-Blocks are made of tool steel, hardened, tempered & precision ground on all sides. These are supplied in matched pairs having
both sides ‘V’ with one clamp.
Unbreakable Steel Clamp.
All Hardened & Tempered 52 - 56 HRC.
Parallelism & Squareness of all faces & 'V' within ± 0.005mm.
Inspection certificate is furnished.
PRECISION COMPOUND SINE VICE - SCREW TYPE
C. I. ANGLE PLATE - SLOTTED
Sizes APS-110 to APS-200 are in open ends type as shown in p i c t u r e .
Sizes APS-225 to APS-300 are in webbed ends type .
‘TOOLFAST’ C. I. Angle Plate-Slotted is made out of high quality seasoned casting having precision ground outside faces & ends. Machined slots
for clamping on both faces.
Accuracy in parallelism& squareness within ± 0.01mmper 200mm length.
Inspection certificate is furnished.
MAGNETIC V-BLOCK
‘TOOLFAST’ Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately fitted magnet ensures easy movement of
knob. Available in single as well as matched pairs.
These V-blocks have main holding 'V' and bottom face fitted with hardened steel plates having hardness 52-56 HRC.
Parallelism & Squareness of all faces & 'V' within ± 0.005mm.
Most suitable for inspection and tool room applications.
Inspection certificate is furnished.
Grinding Accessories
MODEL
LENGTH HEIGHT
SVB-50
SVB-80
SVB-100
SVB-125
SVB-150
50
80
100
125
150
37
60
75
95
98
37
60
75
95
98
WIDTH
MODEL
LENGTH
HEIGHT
MVB-4-H
MVB-6-H
100
150
95
95
75
75
WIDTH
MODEL
SIZE
APS-110
APS-150
APS-175
APS-200
APS-225
APS-250
APS-300
110 x 85 x 75
150 x 125 x 110
175 x 135 x 110
200 x 150 x 125
225 x 175 x 150
250 x 200 x 150
300 x 225 x 200
24
‘TOOLFAST’ Precision compound Sine Vice has compound sine angle setting on two sine plates. Both the tiltings are controlled by fine screws.
All Hardened & Tempered to 52 - 56 HRC.
All side Parallelism & Squareness within ± 0.005mm.
Centre distance of rollers within ± 0.005mm.
Inspection certificate is furnished.
Charts for setting both sine angles with the help of gauge blocks is provided.
MODEL
JAW DEPTH
JAW WIDTH
CSGV-3
MAX. JAW
OPENING
OVERALL
LENGTH
OVERALL
HEIGHT
N. W.
Kgs.
HOLDING
CAPACITY
Ø MAX
N. W. Kgs.
(Pair with
one clamp)
N. W.
Kgs. (Pair)
N. W.
Kgs.
35
60
75
90
95
75
30
76
160
124
2.9
4.7
5.5
8.0
13.0
15.0
25.0
9.0
9.0
13.5
1.1
3.8
7.6
14.3
19.0