Basic HTML Version
PRECISION SINE VICE
‘TOOLFAST’ Precision Sine Vice is used to obtain precise angles by means of gauge blocks. Apart from its use
on milling and grinding machine, this Sine Vice can also be used as a reference for inspection.
All Hardened & Tempered to 52 - 56 HRC.
All side Parallelism & Squareness within ± 0.005mm.
Centre distance of rollers within ± 0.005mm.
Inspection certificate is furnished.
Chart for setting sine angles with the help of gauge blocks is provided.
EF-D1
EF-S1
EFR-10 EFR-104
PRECISION STEEL PARALLELS
‘TOOLFAST’ Steel Parallels are used as precision packing supports under jobs or fixtures. Made from tool steel, hardened, tempered & precision
ground in matched pairs. Matched pairs are marked with identical serial numbers. All sides are chamfered. Overall sizes are nominal.
Hardened & Tempered 52 - 56 HRC.
Parallelism within 0.005mm upto 200mm length.
Inspection certificate is furnished.
EDGE FINDER
MODEL
EF-S1
EF-D1
EFR-10
EFR-104
SHANK
DIA
10
10
10
10
TIP DIA
10
5 &10
10
4 & 10
TYPE
Edge Finder-single end
Edge Finder-double end
Edge Finder-disc type
Disc Type - double end
‘TOOLFAST’ Grinding Vice - screw type is a precision machine vice. Body & jaw made of tool
steel, hardened, tempered & precision ground.
Hardened & Tempered to 52 - 56 HRC.
All sides Parallelism & Squareness within ± 0.005mm.
Inspection certificate is furnished.
MODEL
JAW DEPTH MAX. JAW OPENING
JAW WIDTH
63
73
88
100
125
150
32
35
40
45
50
50
GV-65
GV-75
GV-90
GV-100
GV-125
GV-150
85
100
125
125
158
175
GRINDING VICE - SCREW TYPE
MILLING & GRINDING ACCESSORIES
MODEL
SIZE
10 x 20 x 150
15 x 35 x 150
20 x 45 x 200
25 x 55 x 250
30 x 60 x 300
45 x 75 x 300
TSP-20
TSP-35
TSP-45
TSP-55
TSP-60
TSP-75
23
OVERALL LENGTH OVERALL HEIGHT
190
210
250
260
300
315
65
74
88
95
110
110
N. W.
Kgs.
N. W.
Kgs.
N. W.
Kgs.
0.47
1.24
2.80
5.34
8.50
15.80
0.03
0.03
0.06
0.06
4.4
6.2
10.0
13.0
20.0
24.5
MODEL
JAW DEPTH
JAW WIDTH
PSV-2
PSV-3
PSV-4
50
73
100
25
35
45
65
100
125
MAX. JAW
OPENING
OVERALL
LENGTH
OVERALL
HEIGHT
N. W.
Kgs.
140
190
245
80
104
134
3.2
7.2
16.5
TOOLFAST’ Edge Finder is used for fast and accurate location of starting point of work pieces with respect to the machine spindle on
milling or jig boring machine tables.
Application:
Edge finder is used for location of edges, shoulders, grooves etc. of work pieces kept on machine table with respect to the
machine spindle. Shank of the Edge Finder is held in the collet or chuck and work table is traversed to cause the rotating tip of the edge
finder make contact with the edge of the work piece to be located. Once the rotating tip
comes in contact with the work piece, work table is further traversed so that the rotating
tip shifts to a concentric position with respect to the shank. Now any movement to "off
centre" will cause a distinct 'wobble'. At this point, the distance from the work edge to the
centre of machine spindle is equal to half the diameter of the tip of the edge finder.
Available in single & double ended tip. In double ended tip, Edge Finder can be held from
both ends and both the tips of two different sizes can be used for edge finding.
Shank and tip of the edge finder are coupled together with the help of an internal spring
for independent rotation of both. It is hardened and accurately ground all over to ensure
repeatability of work location within 0.01 mm.