VERTICAL HANDLE - FLANGED BASE

These toggle clamps have a flanged base with holes for mounting on the fixture plate. Handle remains in vertical position while clamping.

VERTICAL HANDLE - FLANGED BASE-HEAVY DUTY

VHDT-32-U-HD VHDT-32-U-HD is the heavy duty version of the most popular vertical handle toggle clamp VHDT-32-U.

VERTICAL HANDLE - SOLID ARM

These toggle clamps have a Solid Arm with a tapped hole at the end.

VERTICAL HANDLE - BASE STRAIGHT

These toggle clamps are similar to VHDT models but with Base Straight. Straight Base design enables mounting on a vertical surface.

T HANDLE - FLANGED BASE

Smaller sizes of VHDT models are also available in T-Handles.These are available in U-arm models only as shown in table below.

VERTICAL HANDLE - R. ANGLE

This model has vertical handle with a right angled dual mounting base which can be base flange mounted as well as front mounted on side wall of a fixture.

DROP HANDLE - Model dtc-70

These are low silhouette clamps with mounting flexibility of front as well as base mounting. Its unique design keeps the arm and handle clear for easy loading and unloading of parts.

FORWARD HANDLE - model fhtc-13

pull back clamp

HORIZONTAL HANDLE - thumb type

Low height design of these hold down toggle clamps requires less overhead clearance as the handle remains in horizontal position while clamping.

horizontal handle - long type

Low height design of these hold down toggle clamps requires less overhead clearance as the handle remains in horizontal position while clamping.

horizontal handle - BASE STRAIGHT

Standard Hex. Head Clamping Spindle assembly is provided as standard accessory with all above clamps. U-Arm models are provided with 2 nos.

horizontal handle - MINIATURE SERIES

These two models are miniature versions of horizontal handle clamps useful for light and miniature applications.

front base - steel fabricated body

'TOOLFAST' Push/Pull Action Toggle Clamps have a straight line action as the plunger moves in straight line forward & backward with easy to operate handle.

FRONT BASE - HEAVY DUTY

PATC-12-FB-HD PATC-12-FB-HD is the heavy duty version of the most popular push/pull action toggle clamp PATC-12-FB.

FRONT BASE - C.I. BODY

Standard Hex. Head Clamping Spindle assembly is provided as standard accessory.

CENTRE BASE

'TOOLFAST' Push/Pull Action Toggle Clamp - Centre Base has its base at the centre and the bigger two sizes have more centre height than the front base model to accommodate larger work pieces.

TOGGLE CLAMP-LONG TRAVEL

MINIATURE MODEL - PATC - 6

This is a Miniature Model of Push/Pull Action Toggle Clamp useful for light clamping where less space is available.

HEAVY DUTY - Model PATC-25

This is a Heavy Duty version of Push/Pull Action Toggle Clamp useful where high clamping force or long plunger travel is required.

FRONT MOUNTING TYPE

'TOOLFAST' Push/Pull Action Toggle Clamps - Front Mounting Type are simply flush mounted through a panel or plate by a hexagonal lock nut on the work piece side.

SIDE HANDLE-PATC-9-FB-SH

REVERSE HANDLE - model PAR-14

These Push / Pull Action Toggle clamps have reverse handle action as the plunger moves in pushing position when the handle is moved back towards the operator.

TOGGLE VICE CUM PRESS

'TOOLFAST' Toggle vice cum press is a multifunction quick action vice cum press having a unique design with precision machined body on which Push Action Toggle Clamp of suitable model.

modular design

These are modular weldable clamps which allow the designer complete flexibility to position the base, clamp arm and handle and weld them in any desired position to suit the application.

MODULAR DESIGN

These are straight base version of WTC series. All other features are same. Arm and handle are supplied loose alongwith the clamp which will be welded at desired position before use.

latch type - horizontal cum vertical

Pull Action Clamps are Latch type clamps used for sealing chambers, lids, doors of moulds, drums, containers or other vessels etc. Also suitable for clamping moulds in industries such as resin...

latch type-horizontal

These are newly introduced models having same dimensions of mounting etc. as PAC-HV series given on previous page but with a modified low height handle suitable for only horizontal locking.

medium duty model pac-5-h

PULL ACTION CLAMP LATCH TYPE-HORIZONTAL NEW SERIES

PULL ACTION CLAMP - HORIZONTAL With Trigger Lock

HEAVY DUTY MODEL PAC-10-H & PAC-10-H-TR with TRIGGER LOCK

This model is for applications where heavy duty Latch type clamping is required. Clamp base and Latch plate are made of solid steel.

HEAVY DUTY model pac-12-h & PAC-12-H-TR with TRIGGER LOCK

This model is for applications where heavy duty Latch type clamping is required. Clamp base and Latch plate are fabricated out of Solid Steel.

light duty

LIGHT DUTY - lockable type

ECONOMY SERIES MODEL ELC-40

hook type model hpa-8

pneumatic operation

This is the most widely used type which permits to locate the clamping spindle anywhere along the length of the arm.

pneumatic operation

User can select an optional clamping spindle assembly as per the application from the different types of clamping spindle assemblies shown on one of the following pages and order these separately.

SQUEEZE ACTION TOGGLE

'TOOLFAST' Squeeze Action Toggle Clamps hold the work piece between two clamping jaws like a plier and lock in that position like a toggle clamp and stay locked until the handles are pulled apart.

CLAMPING SPINDLE ASSEMBLIES

STANDARD HEX. HEAD SPINDLE ASSEMBLY : Suitable sizes of these spindle assemblies are provided as standard accessory with all toggle clamps.