Basic HTML Version
Compact Milling Clamps
‘TOOLFAST’ compact milling clamp is the most multipurpose, quick and easy to use down-hold milling clamp. It is equally suitable for clamping
while all kinds of machining operation on Drilling, Milling, Machining Centre, EDM etc. This clamp does not require any support blocks or any
kind of adjustment, clamping is done by simple turning of the removable spanner key.
COMPACT MILLING CLAMP
Height Block
HB-CMC-75
N.W. 1.53 Kgs.
HEIGHT BLOCK FOR CMC CLAMP :
By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block model
HB-CMC-75 increases clamping height range by 75mm.
CMC-12
CMC-14
CMC-16
CMC-18
12
14
16
18
1600 kgs.
1600 kgs.
1600 kgs.
1600 kgs.
0-125
0-125
0-125
0-125
CLAMPING HEIGHT RANGE
SUITABLE FOR T-SLOT SIZE
HOLDING CAPACITY
MODEL
42
95
0 - 125
*
20
75
105
105
42
75
N. W. Kgs.
(Including Spanner)
HB-CMC-75 stacked under CMC clamp
to increase height by 75 mm. More height
blocks can also be stacked over one another
to increase height in multiples of 75mm.
2.0
2.0
2.0
2.1
*
Arm can also clamp 55mm below 0 i.e. its base surface
Key for
mounting bolt
Tightening Spanner
7
Range 20 - 200