Basic HTML Version
5
‘TOOLFAST’ Universal Strap Clamp is most suitable for die clamping on power presses and a very useful clamp for job clamping on ‘T’ slot table
of Drilling, Milling, Shaping, Boring and other machine tools. No supports are required at the rear of the clamp since the body of the clamp is
self-positioning as the rear part rests on the table and front holds the job. The body positions itself with the help of swival hinge pin according to
the thickness of the workpiece, the T-Bolt remaining in vertical position and the nut is tightened on the flattened portion of swival hinge pin.
Clamp is supplied complete with hardened T-Bolt & special nut.
USC-12A
USC-12B
USC-16A
USC-16B
USC-20A
USC-20B
USC-24A
USC-24B
12
14
16
18
20
22
24
28
0-60
0-60
0-80
0-80
0-100
0-100
0-120
0-120
105
105
130
130
160
160
190
190
42
42
50
50
55
55
65
65
M12 x 1.75 x 100
M12 x 1.75 x 100
M16 x 2.0 x 130
M16 x 2.0 x 130
M20 x 2.5 x 150
M20 x 2.5 x 150
M24 x 3.0 x 210
M24 x 3.0 x 210
MODEL
T-SLOT SIZE A d
Ø
x PITCH x L
CLAMPING
RANGE B
LENGTH OF
CLAMP C
BREADTH OF
CLAMP
‘TOOLFAST’ Mould Clamp is designed specially for low height applications only such as clamping of moulds on plastic injection moulding
machines & pressure die casting machines. The compact front portion of the clamp enables it to penetrate into the limited clamping area of the
mould and clamp it. The positioning of forged swival washer on required curved groove enables the operator to set the center distance between
the clamping portion and the clamping bolt as per the nearest tapped hole available on platen (where there are no T-slots). No supports are
required at the rear of the clamp as the rear portion rests on the platen and front holds the mould. Flanged nut is tightened on the swival washer
which takes care of the positioning of clamp body. These clamps are equally useful on pressure die casting machines, hydraulic presses &
power presses where low height clamping is done.
Clamps are supplied complete with swival washer, flanged nut & clamping stud or T-Bolt as shown in tables below.
MC-12
MC-16
MC-20
MC-24
0-35
0-40
0-50
0-60
110
135
160
180
50
60
70
80
MOULD CLAMP - WITH CLAMPING STUD
MODEL
CLAMPING
RANGE B
LENGTH OF
CLAMP C
BREADTH OF
CLAMP
MOULD CLAMP - WITH T- BOLT
MC-12A
MC-12B
MC-16A
MC-16B
MC-20A
MC-20B
MC-24A
MC-24B
12
14
16
18
20
22
24
28
0-35
0-35
0-40
0-40
0-50
0-50
0-60
0-60
110
110
135
135
160
160
180
180
50
50
60
60
70
70
80
80
T-BOLT M-12 x 1.75 x 100
T-BOLT M-12 x 1.75 x 100
T-BOLT M-16 x 2.0 x 130
T-BOLT M-16 x 2.0 x 130
T-BOLT M-20 x 2.5 x 150
T-BOLT M-20 x 2.5 x 150
T-BOLT M-24 x 3.0 x 210
T-BOLT M-24 x 3.0 x 210
d
Ø
x PITCH x L
CLAMPING
RANGE B
LENGTH OF
CLAMP C
BREADTH OF
CLAMP
MODEL
T-SLOT
SIZE A
MOULD CLAMP
FOR PLASTIC INJECTION MOULDING & PRESSURE DIE CASTING MACHINES
STUD M-12 x 1.75 x 100
STUD M-16 x 2.0 x 125
STUD M-20 x 2.5 x 175
STUD M-24 x 3.0 x 200
d
Ø
x PITCH x L
FOR POWER PRESSES, MILLING, DRILLING, SHAPING, BORING ETC.
UNIVERSAL STRAP CLAMP
N. W.
Kgs.
N. W.
Kgs.
N. W.
Kgs
0.84
0.86
1.73
1.74
2.45
2.48
4.39
4.68
0.99
1.67
2.81
4.19
1.15
1.30
1.76
1.78
2.89
2.92
4.40
4.72
Die And Mould Clamps
CLAMPING ON MILLING
PRESS TOOL CLAMPING