Basic HTML Version
INTRODUCTION
Toggle Clamps with Pneumatic Operation have a Pneumatic cylinder mounted for operation only, the clamping force exerted comes from the
toggle mechanism. Pneumatic operation has following advantages :
High speed operation
Any number of clamps can be operated simultaneously with the help of a switch.
Clamps can be operated in any desired sequence automatically by controlling the cycle electrically.
Clamps can be mounted at normally inaccessible position which are not in operator's reach for manual operation.
Reed switch mounted pneumatic cylinders can be used if position sensoring is required.
‘TOOLFAST’ Toggle Clamps with Pneumatic Operation are available in different sizes in both Hold Down Action and Push Action as
given below.
‘TOOLFAST’ Hold Down Toggle Clamps with Pneumatic Operation are available in following sizes and following two types of arms :
U- Arm :-
This is the most widely used type which permits to locate the clamping spindle anywhere along the length of the arm.
ST- Arm :-
This is a solid bar with a tapped hole at the end. This arm can also be cut to any required length and hole can be made at any
desired position or a separate clamping assembly can be welded at any desired point as per the application.
HOLD DOWN TOGGLE CLAMP - PNEUMATIC OPERATION
Standard Accessories provided with Clamp :
Standard Hex. Head Clamping Spindle assembly is provided as standard accessory with all
above clamps. U-Arm models are provided with 2 nos. U-Flanged Washers also along with clamping spindle assembly.
Optional Accessories :
User can select an optional clamping spindle assembly as per the application from the different types of clamping
spindle assemblies shown on one of the following pages and order these separately.
*Above models are also available in BR ARM.
HD- 5-U
PO 3
HD- 5-
PO 3 ST
HD- -U
PO 50
HD- -
PO 50 ST
HD- -U
PO 85
HD- -
PO 85 ST
U-ARM
ST-ARM
U-ARM
ST-ARM
U-ARM
ST-ARM
1.52
1.60
2.57
2.67
7.40
7.83
36
49
85
C E F
N ØG
16
18
32
M-8
M-10
M-16
81
104
167
276
345
499
MODEL
A B
MAX.
MOUNTING BASE
J SUITABLE FOR
SPINDLE DIA
H L
N. W.
Kgs.
60
75
110
32
44
70
19
28
50
8
8.5
12.5
6.8Ø
8.5Ø
10.5Ø
65
95
135
ARM TYPE*
Toggle Clamps- Pneumatic Operation
44
HOLDING
CAPACITY
200 Kgs.
400 Kgs.
700 Kgs.