PINCH CLAMPS and stops

FOR MACHINING CENTER, MILLING, SHAPING, PLANNING, JIG BORING ETC.

Low Height Pinch Clamp
'TOOLFAST' Low Height Pinch Clamp is useful for job clamping where complete top surface of the job is to be machined in one setting and hence can be clamped only from side faces. When serrated front portion is pressed against the job by tightening the front bolt, it gives a downward as well as forward damping force. Body is made of hardened alloy steel. It is most useful on Milling, Shaping, Planning and Jig boring machines. Supplied complete with hardened T-Nuts & Standard Bolts.

MODEL SUITABLE FOR T-SLOT
SIZE T
A B C CLAMPING FORCE Max. N. W.
Kgs.
F1 F2
PC-1A 12 105 30 15 1600 Kgs. 60 Kgs. 0.44
PC-1B 14 105 30 15 1600 Kgs. 60 Kgs. 0.49
PC-2 16 130 38 18 2500 Kgs. 100 Kgs. 0.92
PC-3 18 130 38 18 2500 Kgs. 100 Kgs. 1.00
PC-4A 20 175 48 24 4000 Kgs. 250 Kgs. 1.65
PC-4B 22 175 48 24 4000 Kgs. 250 Kgs. 2.30
PC-5A 24 175 48 24 4000 Kgs. 250 Kgs. 2.31
PC-5B 28 175 48 24 4000 Kgs. 250 Kgs. 2.72

Heavy Duty Pinch Clamp
'TOOLFAST' Heavy Duty Pinch Clamp is a heavier version of Low Height Pinch Clamp. Basic function is same but this is used for clamping from sides of heavy blocks or thicker plates for facing of top face in one setting. Supplied complete with hardened T-Nuts & Standard Bolts.

MODEL SUITABLE FOR T-SLOT
SIZE T
A B C CLAMPING FORCE Max. N. W.
Kgs.
F1 F2
HDPC-1A 18 185 62 38 4000 Kgs. 250 Kgs. 3.35
HDPC-1B 20 185 62 38 4000 Kgs. 250 Kgs. 3.39
HDPC-2A 22 185 62 38 4000 Kgs. 250 Kgs. 3.36
HDPC-2B 24 185 62 38 4000 Kgs. 250 Kgs. 3.96
HDPC-3 28 185 62 38 4000 Kgs. 250 Kgs. 4.42