MOULD CLAMP

FOR PLASTIC INJECTION MOULDING & PRESSURE DIE CASTING MACHINES

'TOOLFAST' Mould Clamp is designed specially for low height applications only such as clamping of moulds on plastic injection moulding machines & pressure die casting machines. The compact front portion of the clamp enables it to penetrate into the limited clamping area of the mould and clamp it. The positioning of forged swival washer on required curved groove enables the operator to set the center distance between the clamping portion and the clamping bolt as per the nearest tapped hole available on platen (where there are noT-slots). No supports are required at the rear of the clamp as the rear portion rests on the platen and front holds the mould. Flanged nut is tightened on the swival washer which takes care of the positioning of clamp body. These clamps are equally useful on pressure die casting machines, hydraulic presses & power presses where low height clamping is done.
Clamps are supplied complete with swival washer, flanged nut & clamping stud or T-Bolt as shown in tables below.


MOULD CLAMP - WITH CLAMPING STUD
Model dØ x PITCH x L CLAMPING
RANGE B
LENGTH OF
CLAMP C
BREADTH OF
CLAMP
TIGHTENING
TORQUE Nm Max.*
CLAMPING FORCE
Max.
N. W.
Kgs.
MC-12 STUD M-12 x 1.75 x 100 0-35 110 50 90 2000 Kgs. 0.99
MC-16 STUD M-16 x 2.0 x 125 0-40 135 60 220 3200 Kgs. 1.67
MC-20 STUD M-20 x 2.5 x 175 0-50 160 70 420 5000 Kgs. 2.81
MC-24 STUD M-24 x 3.0 x 200 0-60 180 80 730 6000 Kgs. 4.19
MOULD CLAMP - WITH T- BOLT
Model dØ x PITCH x L T-SLOT
SIZE A
CLAMPING
RANGE B
LENGTH OF
CLAMP C
BREADTH OF
CLAMP
TIGHTENING TORQUE
Nm Max.*
CLAMPING FORCE
max.
N. W.
Kgs.
MC-12A T-BOLT M-12 x 1.75 x 100 12 0-35 110 50 90 2000 Kgs. 1.15
MC-12B T-BOLT M-12 x 1.75 x 100 14 0-35 110 50 90 2000 Kgs. 1.30
MC-16A T-BOLT M-16 x 2.0 x 130 16 0-40 135 60 220 3200 Kgs. 1.76
MC-16B T-BOLT M-16 x 2.0 x 130 18 0-40 135 60 220 3200 Kgs. 1.78
MC-20A T-BOLT M-20 x 2.5 x 150 20 0-50 160 70 420 5000 Kgs. 2.89
MC-20B T-BOLT M-20 x 2.5 x 150 22 0-50 160 70 420 5000 Kgs. 2.92
MC-24A T-BOLT M-24 x 3.0 x 210 24 0-60 180 80 430 6000 Kgs. 4.40
MC-24B T-BOLT M-24 x 3.0 x 210 28 0-60 180 80 730 6000 Kgs. 4.72
* Exceeding the maximum torque damages the clamp parts and warranty expires.