COMPACT MILLING CLAMP

‘TOOLFAST’ compact milling clamp is the most multipurpose, quick and easy to use down-hold milling clamp. It is equally suitable for clamping while all kinds of machining operation on Drilling, Milling, Machining Centre, EDM etc. This clamp does not require any support blocks or any kind of adjustment, clamping is done by simple turning of the removable spanner key.




Model CLAMPING HEIGHT RANGE SUITABLE FOR T-SLOT SIZE TIGHTENING TORQUE Nm Max.* CLAMPING FORCE Max. N. W. Kgs.
(including spanner)
CMC-12 0-125 12 70 1600 kgs. 2.0
CMC-14 0-125 14 70 1600 kgs. 2.0
CMC-16 0-125 16 70 1600 kgs. 2.0
CMC-18 0-125 18 70 1600 kgs. 2.1
* Required torque can be achieved manually by tightening spanner included with CMC clamp. Applying extra torque by using extension pipe or by hammering damages the clamp parts and warranty expires.

Height Block For CMC Clamps

By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block model HB-CMC-75 increases clamping height range by 75mm.